Car seat removal and assembly steps are as follows:
1, the general front seat slide put the last, you can remove the front two screws, and then slide the slide to the front, remove the back two screws;
2, remove the air bag line, the safety belt alarm line on the line, the back seat first remove the cushion, the general seat to lift up, you can remove the two buckles, while pressing back, while lifting up you can remove the cushion;
3, backrest removal need to put the back backrest and then take a screwdriver against the rotating shaft can be removed.
1. Remove the armrest screws with the sleeve first and remove the armrest.
2. Remove the plastic cover of the seat adjustment knob with the tiger teeth, remove the base screw with the sleeve, remove the front seat and disassemble.
3. Remove the elastic that connects the seat rest and take out the front seat seat.
4. Remove the backplane screws, remove the front backplane, and disassemble the front seat.
There are fixing screws on the slide of the front seat that can be removed directly, and there are two fixed buttons under the cushion of the rear seat that can be removed by pressing them down. The backrest of the GLS can be placed directly and then the fixing screws can be removed in the trunk. The GL version is more troublesome because the backrest cannot be placed but the fixing screws are in the same position.
